How do I choose a quality diamond polishing pads to polish the granite edge?

After shaping a granite edge, it's able to polish. polishing is typically done either wet or dry. Wet polishing is completed with water; dry polishing while not water. Wet polishing can typically offer a superb polish within the least time for many stones. Dry polishing is employed once water and wet polishing aren't doable or possible. Dry variable speed polishers and dry polishing pads have improved within the past years. it's currentlydoable to urge superb results polishing dry.

The 3 main kinds of stone polishers area unit center feed water air polishers, center feed water electrical polishers and variable speed non-water grinders. The air and electrical polishers area unit typically best for polishing. optimum polishing speed is around three,000 RPMs for many granite counter A-one. Engineer stone polishingmight best work a lower 2000 RPMs.

The basic polishing methodology involves moving a spinning pad in associate up and down motion over the formed stone edge. whereas moving up and down, the storyteller moves the power tool left to right and back over the stone edge. the strategy is best picked up by looking at either a optical disk on stone polishing or associatepracticed power tool.

All stone polishing is step based mostly. beginning with coarser grits, the stone edge is polished to a regularend with every grit before moving to following grit. A sequence of grits- fifty, 100, 200, 400, 800, 1500, 3000 and final buff area unit typical for edge polishing. Skipping grits won't invariably end in the simplest end. Buff pads are available either black or white. once buffing darker stone use black buff; lighter stone use white buff. Neutral stones could also be buffed with either black or white buff.

Dry polishing can produce dirt. however dry polishing encompasses a real advantage once polishing already put in interior stone work or alternative places wherever water isn't possible.

We recommend the use of ZL-123C wet polishing pads & ZL-123J Dry Diamond Polishing Pads for polishing the granite edge.

Advantages:
a) High efficiency :Make a high gloss finish in a short time for marble and no fadesgranite. 
b) Nice surface:Never marks the stone and burns the surface of the granite to change natural color.
c) Good quality: Bright clear light and never fads.

This granite wet floor polishing pads have 2.5, 2.7 and 3.5mm thickness can be choose and also have 5 size can be order, you can find that our factory have so many grit from 50# to 3000# for polishing pads, we suggested for this granite floor polishing pads wet use, if use without water it will reduce it's life span.

Suit for 600-1200rpm speed, not like the electroplated pads work for a while need to stop for a minute, this floor wet polishing pads can be always use until the diamond part finished.

As I told to you that if you have your own design need to produce, we also can make for you, not just about the wet marble polishing pads, but also the other polishing or grinding tools, you can find most of the diamond tools in our company.

ZL-123J Dry Diamond Polishing Pads

more details at https://www.zdiamondtools.com/marble-diamond-tools/2019/0805/ZL-123J-Dry-Diamond-Polishing-Pads-for-Marble-Polishing.html​​​​​​​

-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-13459035657
-Email: ceo@zdiamondtools.com
-Web www.zdiamondtools.com

Company Profile

Certifications

Company Team

Exhibition

Logistics

FAQ

​​​​​​​