How to select suitable cutting and grinding Diamond Tools according to Dekton characteristics?

Dekton has different names for different businesses and applications. Some customers refer to it as Dekton, some as Sintered Stone and some 
simply as Ceramic or Porcelain. No matter how it is called, Dekton cannot change the difference between it and Quartz, Ceramic and Stone. 
Next, let's take a look at what special properties Dekton has and what diamond Tools are the most appropriate.

The Characteristics of Dekton
Dekton: as we mentioned earlier, the term engineered stone simply means that it is produced in a controlled way using an engineering process. 
So what is Dekton's engineering method? Dekton is created using the same raw amterials found in natural rock that has undergone the 
metamorphosization process. The process used to engineer Dekton is called "sintering". 

However, Dekton's specific method is called TSP (Technology of Sinterized Particles). The process includes putting the raw materials under 
extreme pressure, heat, and perhaps even other forces to actually change the materials into a new substance. 

If you would like to learn more about this material, you can read more on our page entitled Information About Dekton.

Dekton Fabrication and Installation

The fabrication process requires very specific tools. Diamond coring bits, bridge saw blades, and polishing pads are all tools that you need to 
have in order to fabricate and install either of these materials. The diamond tools are made to cut, shape, smooth, and finish the surfaces being fabricated.

As we mentioned earlier, Dekton is produced by exposing the materials to intense pressure and heat. This results in a slab that is very compact.

Dekton too has "internal stress" that affects the way the material must be handled, prepared, and cut. Knowing these best practices is what the
 fabrication process of Dekton.

Dekton Care 
According to the characteristics of Dekton, we can simply summarize three special attributes, as follows:
1) Stain Resistance
2) Scratch Resistance
3) Heat Tolerance

1) Resistance to Staining

Dekton is relatively easy to care for as far as stain resistance and cleaning are concerned. Why is that the case? Because Dekton material
 is non-porous and anything that could discolor them stays on the surface of the slab. And although some substances can dry on the surface, 
you can simply use an appropriate cleaning product to remove the substance from the stone's surface.

2) Scratch Resistance
Dekton material is scratch resistant. With Dekton, you are free to cut your vegetables up right on the countertop if you so choose. Granted, 
many decide that keeping knives sharp is a good contributor to ease of cooking. Yet, it does illustrate well how durable Dekton surfaces 
are when it comes to scratch resistance.

3)Tolerance to Heat

Dekton is produced in very extreme heat and once it is changed into the ultracompact surface, it can withstand an extremely high temperature. 
So much so, that it does not need a trivet. That's right, you can set pots and pans directly from the stove directly on Dekton countertops. 
This is not something that other types of surfaces recommend. In fact, they discourage it.

Dekton Diamond Tools

Now, if you are a fabricator, you'll need to get familiar with how to work with Dekton. And if you are a consumer, you will need to
 decide on the proper Dekton color choice for your selected design style.

No matter what type of manufacturer you are, you need diamond tools for cutting, polishing, grinding Dekton. To ensure that 
your engineering projects achieve the desired results and objectives.

Next, I would like to recommend our professional diamond tools for cutting and grinding Dekton.

First of all, I would recommend Dekton Diamond Saw Blade, which we classify as Normal and Silent Diamond Saw Blade.

ZL-FC 350mm Dekton Silent Diamond Cutting Blade Circular Saw Blade For Ceramic

ZL-FC Diamond Cutting Blade
Designed for cutting Dekton / ceramic or artificial stone which is similar to Vramil such as Dekton. Utilizing high quality,
self-sharpening diamvd unique formula and structure design, high precision welding.
Note: Silent type and normal type available.

Advantage：
1.Sharp and durable
2.Low cutting resistance, high cutting edge
3.Cut smoothly without chips

Product code: ZL-FC
Type: Silent, normal
Specification: Φ300 Φ350 Φ400 Φ450 Φ500 Φ600

Second, I will recommend Dekton Grinding Flap Disc to you. Our Electroplated Flap Disc is a versatile application that can be widely used for Grinding 
various hard materials. He used our Flap Disc to grind Dekton, and the results were remarkable! The following is only one Flap Disc. 
For more information, please refer to the Flap Disc series

ZL-WMC66S （Shinning net pattern）Electroplated Diamond Flap Disc for Stone Concrete Glass Ceramic Steel Grinding

ZL-WMC66S（Shinning net pattern）Diamond Flap Disc
Used for grinding and trimming of stone, concrete, glass, ceramics, steel, synthetic material, alloy materials, monocrystalline and polycrystalline silicon, superalloy, etc.
Advantage：
1.Reinforced flap, no falling
2.Durable, high efficiency
3.Metal based, good heat dissipation
Product code：ZL-WMC66S（Shinning net pattern）
Specification：4" 4.5" 5"
Grit：30# 60# 120# 200# 400# 600#


ZL-WMC66S （Shinning net pattern）Electroplated Diamond Flap Disc for Stone Concrete Glass Ceramic Steel Grinding

ZL-WMC66S（Shinning net pattern）Diamond Flap Disc
Used for grinding and trimming of stone, concrete, glass, ceramics, steel, synthetic material, alloy materials, monocrystalline and polycrystalline silicon, superalloy, etc.

Advantage：
1.Reinforced flap, no falling
2.Durable, high efficiency
3.Metal based, good heat dissipation

Product code：ZL-WMC66S（Shinning net pattern）
Specification：4" 4.5" 5"
Grit：30# 60# 120# 200# 400# 600#

Thirdly, I would recommend Dekton Hand Polishing Pads, our Electroplated Diamond Hand Polishing Pads, also expert in multi-field applications, 
Mainly used in Dekton Edge Polishing! The following is just one example of zL-37C Electroplated Diamond Hand Polishing Pads, 
please refer to the Hand Polishing Pads series for more details.


ZL-37C Electroplated Hand Pad

Patented products, mainly used for grinding of hard materials such as stone, glass, ceramic, hard plastic, fiber glass, etc. Ideal for edge trimming, 
stain or chip removal, and polishing of corner and area where the machine can’t reach.

Advantage：

                  1.Good heat dissipation, not easy to damage the working layer

                  2.Strong water resistance

                  3.High efficiency for partial flat surface grinding

                  4.No deformation on working layer

                  5.Patterns of working layer can be ordered.

Product code：ZL-37C

Specification：90*55mm  

Grit：30#  60#  120#  200#  400#  600#   

If you need more materials or application scenarios or quotes, please contact us, we are happy to provide you with a targeted solution to 
the problem rather than a cold quotation.


Dekton Characteristics,Dekton Care,Dekton diamond tools,Dekton diamond saw blade,Dekton grinding disc